+91 97890 53222
sales@chennailabb.com / chennailab@yahoo.com
Working Hours - Mon - Fri: 9:30 AM - 6:30 PM
logo-img

HEMP Filters

Home HEMP Filters

HEMP Filters

  • Filters are listed per UL specification #1283
  • Temperature Range: Operating -55°C to +85°C
  • Enclosures are made from cold rolled steel with continuously welded seams
  • Filter ground path connecting surfaces shall be tin plated or stainless steel
  • Conduit hubs or clearance holes may be provided if specified when ordering
  • Each phase filter is individually removable
  • Internal filters are filed with a non-flammable impregnant and hermetically sealed
  • Legs for floor mounting may be provided if specified when ordering
  • Filters for 300AMP and up have 6” x 2” mounting U-Channel

Series Chennailabb-FCHS-HEMP Single Individual Filter Elements

Specifications

ELECTRICAL
  • CURRENT RATING: The filters shall be capable of withstanding 140% of rated current for 15 minutes without any deterioration.
  • INSERTION LOSS: The HEMP Filters shall provide the specified insertion loss of 80 db minimum over its indicated frequency range when measured in accordance with the applicable MIL-STD-220C by a government approved laboratory.
  • VOLTAGE: The filters shall be capable of operating continuously at full- rated voltage and of withstanding an initial voltage test of twice the rated voltage for one minute.
    • OPERATING TEMPERATURE
  • FILTER ELEMENT: Assembly: from 0°F to 104°F (-18°C to 40°C) at rated voltage and full load operations Components: from 0°F to 150°F (-18°C to 65°C) at rated voltage and full load operation
    • MECHANICAL
  • CASE: The HEMP Filters case shall be made of cold-rolled steel.
  • FINISH: All HEMP Filters cases shall be made corrosion-resistant with suitable lacquer over primer, All unfinished grounding surfaces shall be protected by suitable plating.
  • IMPREGNANT: The impregnant shall be non-flammable as classified by Underwriters Laboratories.
  • TERMINALS: The terminals shall be made of high temperature alumina ceramic. The ceramic terminal shall have a flexible insulated lead, one end of which is permanently affixed to the terminal, The other end shall be terminated in a permanently affixed lug which shall be mounted on approved flame-retardant insulator.
Part Number Current Rating (AMP) Voltage Rating Frequency Rating (Hz) Dimensions (INCHES) Weight Approx. (LBS)
LG / LL VAC VDC A±.060 B±.060 C±.060 D±.060 E±.060
Chennailabb-FCULX-4 X 30E2 HEMP 4 x 30 277 / 480 600 60 28 38 6 64 26 220
Chennailabb-FCULX-4 X 60E2 HEMP 4 x 60 277 / 480 600 60 28 41 8 64 29 315
Chennailabb-FCULX-4 X 100E2 HEMP 4 x 100 277 / 480 600 60 57 60 10 80 48 520
Chennailabb-FCULX-4 X 225E2 HEMP 4 x 225 277 / 480 600 60 28 60 16 64 48 750
Chennailabb-FCULX-4 X 250E2 HEMP 4 x 250 277 / 480 600 60 28 60 16 64 42 750
Chennailabb-FCULX-4 X 300E2 HEMP 4 x 300 277 / 480 600 60 60 84 16 66 44 850
Chennailabb-FCULX-4 X 400E2 HEMP 4 x 400 277 / 480 600 60 60 84 16 66 44 975
Chennailabb-FCULX-4 X 500E2 HEMP 4 x 500 277 / 480 600 60 60 84 16 66 44 1075
Chennailabb-FCULX-4 X 600E2 HEMP 4 x 600 277 / 480 600 60 45 84 34 38 44 1600
Chennailabb-FCULX-4 X 800E2 HEMP 4 x 800 277 / 480 600 60 60 72 34 66 44 2400
Chennailabb-FCULX-4 X 1000E2 HEMP 4 x 1000 277 / 480 600 60 60 72 34 66 44 2500
Chennailabb-FCULX-4 X 1200E2 HEMP 4 x 1200 277 / 480 600 60 60 72 34 64 44 2750
Chennailabb-FCULX-4 X 1500E2 HEMP 4 x 1500 277 / 480 600 60 60 72 34 64 44 2900

*All Filter Cabinets are also available in 3 line and 4 line configuration

PART NO Current Rating (AMP) VOLTAGE RATING (VAC) Frequency Rating (Hz) WIRE SIZE DIMENSION (INCH) INSERTION LOSS (DB)
A B C 100kHz 1MHz 10MHz 100MHz 1GHz
Chennailabb-FCH-800- E2 800 277 0-60 2.5 x 0.5 Bus Bar 35 17 14 80 80 80 80 80
Chennailabb-FCH-400- E2 400 277 0-60 250MCM 32 16 12 80 80 80 80 80
Chennailabb-FCH-100- E2 100 277 0-60 #2 30 14 10 80 80 80 80 80
Chennailabb-FCH-60- E2 60 277 0-60 #10 28 14 8 80 80 80 80 80
Chennailabb-FCH-30- E2 30 277 0-60 #10 28 14 6 80 80 80 80 80